HIERASIL™ Siliconed Exterior
Pure acrylic copolimer emulsion based, enhanced with silicone additive, matt, top coat, exterior wall paint.
Hierasil™ adsorbs to the surface because of its stuffing power enhanced with siliconized formula. Challenges the exterior conditions, keeps the colour vivid for long years. Superior hiding power, matt looks, easy application, saving on time and labor force.
It can be applied on concrete, plaster, mdf, osb, brick tile, old painted exterior etc.
First, surface must be prepared. Before primer application make sure that the surface is dry, smooth, solid and clean. Hierasil™ Siliconed Exterior Primer is recommended. During application, temperature should be between 5 – 30°C. During application and drying, surface must be protected from rain and frost. After application used equipments must be cleaned with water. Avoid direct paint application on lime or loose layers.
Should be thinned with clean water.
First layer : 15-20%;
Second layer : 10-15%.
First dry : 1-2 hr.
Second dry : 6-8 hr.
Final dry : 24 hr.
Depending on absorbency of the surface, 10-12 m²/lt area can be coated.
Protected from frost and direct sunlight in a cool place, it can be stored for 5 years.
15 Lt, 7,5 Lt, 2,5 Lt.
S 2 : Keep out of reach of children.
S 3/7/9 : Keep container tightly closed in a cool and well ventilated areas.
S 24/25 : Avoid contact with skin and eyes.
S 46 : If swallowed contact with a doctor immediately.
It confirms with TS EN 7847.